BIM Outsourcing · Doha, Qatar

BIM Outsourcing in Qatar

Alftek provides dedicated BIM teams to consultants, contractors and developers in Qatar. The work is managed from our Doha headquarters and produced across our offices in Qatar and India, to the standards, level of development and programme agreed in your BIM execution plan.

Request an Outsourcing Quote

Modeling capacity when the project needs it

BIM workload on a Qatar project is rarely level. It peaks at detail design, again at shop drawings, and again at as-built, and it falls away in between. A consultant or contractor who staffs for the peak carries licences, workstations and people through the quiet months. One who staffs for the average misses submission dates when the peak arrives.

Outsourcing solves that by moving the production to a team built for it. Alftek offers its BIM and VDC services either as full project delivery or as dedicated outsourced resources. You keep the design responsibility and the client relationship. We supply the modelers, the coordination, the software, the hardware and the checking. Alftek has been headquartered at Alfardan Centre in Doha since 2018.

2018
Delivering in Qatar since
50+
BIM workstations, Qatar and India
LOD 100-500
Concept to as-built
ISO 19650
Aligned workflows

BIM work you can outsource to Alftek

A scope can be a single task on one building or the full BIM production for a project. Each item below links to the page that describes it in detail.

Revit Modeling, All Disciplines

Architectural, structural and MEP models in Revit from LOD 100 to LOD 500, built on your templates or ours.

Explore BIM Modeling in Qatar →

Coordination & Clash Detection

Model federation, clash detection runs and resolution reporting in Navisworks, Solibri or Revizto, on a cycle that matches your coordination meetings.

Explore Clash Detection →

Shop Drawings & As-Built Drawings

Shop drawing production from the coordinated model, and 2D as-built drawings and LOD 500 record models updated from site mark-ups.

Explore As-Built Drawings →

Quantities & 4D Sequencing

Quantity take-off and BOQ generated from the model, and 4D construction sequencing linked to the programme.

Explore 4D & 5D BIM →

Scan to BIM

Existing buildings laser scanned with a FARO Focus scanner and the point cloud converted into a Revit model.

Explore Scan to BIM →

BEP & Information Management

BIM execution plans, naming and exchange rules, and the information management routines an ISO 19650 project expects.

Explore ISO 19650 →

Revit Family Creation

Custom parametric families and component objects for project-specific or manufacturer-specific elements.

Asset Data for Handover

Asset data attached to the model and COBie prepared for facility management handover.

Explore CAFM →

In-house BIM team or outsourced team?

Neither is right for every firm. The comparison below is the one we walk through with Qatar consultants and contractors who ask.

QuestionIn-house teamOutsourced team
WorkloadSuits a steady pipeline that keeps modelers busy all yearSuits peaks, single projects and specialist tasks
Fixed costSalaries, visas, licences and workstations carried between projectsPaid per scope; no cost when there is no work
Start-up timeRecruitment and training before the first modelAn existing team, software and hardware
ControlDirect, day to dayThrough the BIM execution plan, agreed reviews and issue dates
StandardsYour ownYour own, or proposed by Alftek and aligned with ISO 19650
CheckingYour reviewers check everythingQA/QC and clash testing by Alftek before issue; your reviewers check coordinated information
A common arrangement: many firms do both. A small in-house team holds the standards, the client relationship and the design decisions, and an outsourced team supplies production capacity around it. That is the arrangement the dedicated-resources option is designed for.

What to send us for a quote

A scope and price can only be as precise as the information behind it. These are the inputs that let us quote properly. If some do not exist yet, send what you have and we will list what is missing.

How an outsourced engagement runs

Alftek follows the same structured six-step delivery process on every engagement, whether we deliver the whole project or act as your production team.

Preparatory and planning

Scope, inputs, standards and level of development are reviewed, and gaps in the information are listed before any modeling is priced.

Implementation

The BIM execution plan is agreed: naming, templates, file exchange, responsibilities, review points and issue dates.

Execution

The team models each discipline to the agreed LOD and raises inconsistencies in the source information as they are found.

Tracking

Progress is reported against the programme, with dashboards where the project uses them, so you can see where each model stands.

QA/QC

Checks are carried out after every discipline and system, and models are federated and clash tested before issue.

Handover

Models, drawings and reports are issued in the formats agreed, typically RVT, IFC, DWG and PDF.

Software and capacity

Alftek works in the platforms Qatar consultants and contractors already use, so outsourced deliverables drop into your existing workflow.

Autodesk Revit

The primary modeling platform for architectural, structural and MEP work.

Navisworks, Solibri & Revizto

Model federation, clash detection and issue tracking across disciplines.

AutoCAD & Civil 3D

2D drawing production, and site, road and utility modeling for infrastructure scopes.

Modeling capacity

More than 50 BIM workstations across Alftek's offices in Qatar and India, built for intensive modeling, coordination and point cloud workloads.

About Alftek →
RevitNavisworksSolibri ReviztoAutoCADCivil 3DBIM 360IFC

Who uses an outsourced BIM team in Qatar

The request usually comes from one of four places.

Engineering & design consultants

Design stays in-house; model production, coordination and drawing output are outsourced so engineers spend their time on design.

Main contractors

Construction-stage models, shop drawings, clash resolution and as-built records, produced to the contract's BIM requirements.

MEP & specialist subcontractors

Coordinated services models and shop drawings for a package, without building a BIM department for one project.

Explore BIM Modeling in Qatar →

Developers & asset owners

Record models of existing assets, and asset data prepared for facility management.

Explore BIM Services in Qatar →
DohaLusailAl Khor Al WakrahAl RayyanUmm Salal

Frequently asked questions

What is BIM outsourcing?

BIM outsourcing means a specialist BIM company produces some or all of a project's models, drawings and coordination work on behalf of a consultant, contractor or developer. The client keeps design responsibility and decision making. The outsourced team supplies the modeling capacity, the software, the hardware and the checking, working to the client's standards and the project's BIM execution plan.

Does Alftek provide outsourced BIM teams in Qatar?

Yes. Alftek is headquartered in Doha and offers its BIM and VDC services either as full project delivery or as dedicated outsourced resources. Work is managed from the Doha office at Alfardan Centre and produced across Alftek's offices in Qatar and India, which together run more than 50 BIM workstations.

What can be outsourced?

Architectural, structural and MEP modeling in Revit from LOD 100 to LOD 500, model federation and clash detection, shop drawings and 2D as-built drawings, quantity take-off and BOQ from the model, 4D sequencing, scan to BIM from point clouds, Revit family creation and COBie data preparation. A scope can cover one of these or the full set.

What do you need from us to quote?

The drawings or models you have (PDF, DWG, RVT or IFC), the BIM requirements in your contract or the Exchange Information Requirements if there are any, the disciplines and LOD you need at each stage, your Revit version and templates if you want the work on your standards, and the programme dates. If some of this does not exist yet, send what you have and we will list what is missing.

Do you work to our templates and standards?

Yes. The naming, templates, families, level of development and file exchange rules are agreed in the BIM execution plan before modeling starts, and can be the client's own. Where a client has no BIM standards yet, Alftek proposes them, aligned with ISO 19650.

Who checks the work before it reaches us?

Alftek's own team. QA/QC is carried out after every discipline and system, and models are federated and clash tested before issue, so the client's reviewers receive coordinated information rather than raw production output.

Is an outsourced team cheaper than hiring in-house?

It depends on the workload. An in-house team suits a steady, long-term pipeline. An outsourced team suits peaks, single projects and specialist tasks, because the client does not carry software licences, workstations, recruitment and idle time between projects. Alftek prices each scope individually, so the honest way to compare is to request a quote for a defined scope.

Where is Alftek located?

Alftek is headquartered at Alfardan Centre, 2nd Floor, Grand Hamad Street, Doha, Qatar, with production offices in India. It serves projects across Qatar including Doha, Lusail, Al Khor and Al Wakrah.

Send us the scope and the dates

Tell Alftek's Doha-based team which disciplines, what level of development and which submission dates. We will reply with a proposed scope, team and quote.

Request a Free Quote