BIM Consultancy · Doha, Qatar

BIM Services in Qatar

Alftek is a Doha-based BIM & VDC consultancy delivering ISO 19650-aligned Building Information Modeling across Qatar — from 3D–6D modeling and scan to BIM to clash detection, CAFM and GSAS sustainability. We help contractors, developers and consultants build Qatar's landmark infrastructure faster, with fewer clashes and lower lifecycle cost.

Get a Free BIM Quote in Qatar

Your BIM partner for Qatar's most demanding projects

Qatar's construction sector — from metro and rail to aviation, healthcare, hospitality and high-rise developments — increasingly mandates BIM for design coordination, quantity certainty and facility handover. Headquartered at Alfardan Centre on Grand Hamad Street in Doha and operating since 2018, Alftek combines local market knowledge with international BIM standards to deliver coordinated, data-rich models on Qatar's most complex builds.

Whether you need a full BIM execution plan (BEP), an outsourced modeling team, or specialist scan-to-BIM for an existing asset, our ISO 19650 workflows keep your project information consistent, auditable and ready for handover.

2018
Delivering in Qatar since
LOD 500
Modeling to fabrication level
3D–6D
Full BIM dimensions
ISO 19650
Aligned workflows

BIM services we deliver across Qatar

End-to-end BIM and VDC capabilities, available as full project delivery or dedicated outsourced resources.

3D BIM Modeling

Architectural, structural & MEP modeling in Revit from LOD 100 to LOD 500 for coordinated, build-ready models.

Explore BIM Modeling in Qatar →

Scan to BIM

Point cloud to BIM and as-built models for renovation, retrofit and facility management of existing Qatar assets.

Explore Scan to BIM in Qatar →

Clash Detection & Coordination

Multi-discipline coordination and Navisworks clash detection to eliminate rework before construction.

Explore Clash Detection in Qatar →

4D / 5D / 6D BIM

4D scheduling, 5D cost & quantity takeoff, and 6D sustainability to de-risk programme and budget.

Explore 4D & 5D BIM in Qatar →

Project Management & CEMP

BIM-led project management and construction environmental management to keep mega-projects on track.

Explore Project Management →

CAFM & Facility Management

Turn as-built models into operational digital assets with BIM/GIS/FM integration and reduced O&M cost.

Explore CAFM →

GSAS Sustainability

GSAS design & construction-management consultancy with 6D BIM for green-building compliance in Qatar.

Explore Sustainability →

Value Engineering

BIM-driven value engineering to optimise design, materials and schedule without compromising quality.

Explore Value Engineering →

Why Qatar clients choose Alftek

We pair the local responsiveness of a Doha-based team with international BIM standards and a uniquely complete service range — from early design through to facility management.

ISO 19650 workflows

Standardised, auditable information management your clients and authorities can trust.

ISO 19650 BIM in Qatar →

GSAS expertise

One of the few BIM consultancies offering GSAS sustainability consultancy alongside modeling — a Qatar-specific advantage.

Full lifecycle

Design → BIM → FM/CAFM under one roof, so your model keeps delivering value after handover.

Explore As-built Drawings in Qatar →

Sector experience

Metro & rail, aviation, healthcare, hospitality, high-rise, education and infrastructure.

DohaLusailAl Khor Al WakrahAl RayyanUmm Salal

How to choose a BIM company in Qatar

Most BIM companies in Qatar list the same services, so the list alone will not tell you much. What separates them is who does the work, which standard they follow, and whether the model is still useful after handover. These are the six questions we suggest asking any BIM consultant in Qatar, and how Alftek answers each one.

1. Is the team based in Qatar?

Alftek's BIM team works from Alfardan Centre on Grand Hamad Street in Doha and has delivered BIM in Qatar since 2018. It runs more than 50 dedicated BIM workstations across its offices in Qatar and India.

2. Which standard do they work to?

We agree a BIM Execution Plan (BEP) with your team that sets out standards, workflows, roles and deliverables, and our information management follows ISO 19650.

How we apply ISO 19650 →

3. Can they cover the whole project?

We model from LOD 100 design through LOD 400 construction to LOD 500 as-built, and hand over COBie data and asset information for facility management.

From BIM to CAFM →

4. Which software do they use?

Autodesk Revit for modeling, Civil 3D for infrastructure, Navisworks, Solibri and Revizto for coordination and clash detection, and BIM 360 for collaboration.

Clash detection matrix & software →

5. Can they work on existing buildings?

Yes. We laser scan existing structures with a FARO Focus scanner and convert the point cloud into Revit models. In Doha that has included existing Qatar Metro station structures.

Scan to BIM in Qatar →

6. Have they worked in your sector?

Our BIM work spans metros and railways, aviation, healthcare, hospitality, sports facilities and stadia, high-rise, education, and roads and utilities.

See our projects →

If you are comparing BIM companies in Qatar for a tender or an outsourced modeling team, send us your drawings or BIM requirements. We will reply with a proposed scope, the LOD for each stage, and a quote.

BIM consultancy in Qatar: what we advise on

Not every project needs an outsourced modeling team. Many need a BIM consultant who sets the project up correctly, so that the designers, contractors and subcontractors producing the models all work to the same rules. Alftek provides that consultancy from Doha, on its own or alongside our modeling and coordination teams.

BIM Execution Plan (BEP)

A project-specific BIM strategy that defines standards, workflows, roles and deliverables. It is produced at the start of the job and agreed with your team before modeling begins.

ISO 19650 information management

Information management that follows ISO 19650, so project information stays consistent, auditable and ready for handover from LOD 100 through LOD 500.

ISO 19650 BIM in Qatar →

BIM implementation planning

Our consultants identify and map the benefits BIM can deliver at each project phase, so effort goes where it pays back: coordination, quantities, programme or facility management.

BIM project management

Structured tracking and monitoring with progress dashboards and regular reporting, and a QA/QC check after every discipline and system, to keep BIM delivery on programme and within budget.

Project management →

Templates and standards

BIM templates and standards set up for the project and kept up to date through construction, so models from every party follow the same setup.

Handover and asset information

COBie data and asset information prepared for facility management, so the model is still useful after handover.

From BIM to CAFM →

Frequently asked questions

What BIM services does Alftek provide in Qatar?

Alftek provides full-lifecycle BIM and VDC services in Qatar including 3D–6D BIM modeling, scan to BIM, clash detection and coordination, MEP and structural BIM, CAD to BIM conversion, value engineering, project management, CAFM and GSAS sustainability consultancy.

Is Alftek's BIM delivery ISO 19650 compliant?

Yes. Alftek follows ISO 19650 information-management workflows on Qatar projects to ensure consistent, audit-ready BIM deliverables from LOD 100 to LOD 500.

Does Alftek support GSAS sustainability requirements in Qatar?

Yes. Alftek offers GSAS design and construction-management consultancy combined with 6D BIM to help Qatar projects meet green-building compliance targets.

Where is Alftek located in Qatar?

Alftek is headquartered at Alfardan Centre, 2nd Floor, Grand Hamad Street, Doha, Qatar, and delivers BIM services nationwide including Doha, Lusail, Al Khor and Al Wakrah.

What should I look for in a BIM company in Qatar?

Look for a team based in Qatar, information management that follows ISO 19650, a BIM Execution Plan at the start of the job, and the ability to carry the model from design through LOD 500 as-built to facility management handover. Ask which software they use and which sectors they have worked in. Alftek meets each of these from its office in Doha.

Does Alftek have a BIM team in Qatar?

Yes. Alftek's BIM team works from its office at Alfardan Centre, Grand Hamad Street, Doha, and has delivered BIM in Qatar since 2018. The company runs more than 50 dedicated BIM workstations across its offices in Qatar and India.

Which BIM software does Alftek use?

Alftek models in Autodesk Revit and uses Civil 3D for infrastructure, Navisworks, Solibri and Revizto for coordination and clash detection, and BIM 360 for collaboration. Final models and drawings can be exported to IFC, RVT, DWG and PDF.

Does Alftek offer BIM consultancy as well as BIM modeling?

Yes. Alftek provides BIM consultancy in Qatar on its own or together with modeling. That includes the BIM Execution Plan, ISO 19650 information management, BIM implementation planning, BIM project management with QA/QC, project templates and standards, and COBie and asset information for handover.

Start your BIM project in Qatar

Talk to Alftek's Doha-based BIM experts about your next project. Get a free consultation and a tailored BIM scope and quote.

Request a Free Quote