BIM Modeling · Doha, Qatar

BIM Modeling Services for Qatar Projects

Alftek builds coordinated architectural, structural and MEP BIM models for projects across Qatar, working to ISO 19650 information management standards. We model to the level of detail each project stage actually needs — not everything to the same depth from day one.

Get a Free BIM Modeling Quote

What BIM modeling actually solves on a Qatar project

BIM modeling isn't a rendering exercise — it's a shared 3D model, full of real project data, that architects, structural engineers, MEP contractors and the client work from at the same time. On a live site in Doha or anywhere else in Qatar, that shared model is what catches a duct clashing with a beam before steel is cut, not after handover when it's expensive to fix. Alftek has built these models for Qatar projects since 2018, working to ISO 19650 information management standards so that what gets modeled in month one is still trustworthy and usable in month eighteen.

We model to the level of detail the project stage actually needs — LOD 100 for early massing and coordination, up to LOD 500 for models that reflect exactly what was built, ready for handover — rather than modeling everything to the same depth by default. That keeps modeling cost proportional to the decisions it's actually supporting, and keeps the model usable rather than just visually impressive.

BIM modeling services we deliver in Qatar

Each service below can run as a standalone engagement or as part of a full BIM execution plan (BEP).

Architectural BIM Modeling

Space planning, massing and detailed architectural models coordinated against structural and MEP disciplines from the outset, not bolted together afterward.

Structural BIM Modeling

Reinforced concrete, steel and composite structural models built for coordination and quantity extraction, not just drawing production.

Structural BIM in Qatar →

MEP BIM Modeling

Mechanical, electrical and plumbing systems modeled and routed to avoid the clashes that cause rework once contractors are on site.

MEP BIM in Qatar →

LOD 100-500 Progression

Models developed to the fidelity each project stage needs, from early concept through fabrication level detail and models that match what was actually built.

LOD 100 to 500 guide →

Clash Detection & Coordination

Coordination across every discipline to resolve conflicts on screen during design, before they reach the site.

Clash detection in Qatar →

Scan to BIM

Point cloud capture of existing Qatar assets converted into accurate models of the existing structure for renovation, retrofit or FM.

Scan to BIM in Qatar →

Why Qatar project teams model with Alftek

Modeling quality shows up later in the project, not on day one — in fewer RFIs, fewer clashes discovered on site, and a model that's still usable at handover rather than shelved.

ISO 19650 workflows

Consistent naming, versioning and information management your consultants and authorities can rely on across the project.

ISO 19650 in Qatar →

Based in Doha

On the ground in Qatar since 2018, able to attend coordination meetings and site walks directly rather than over a time zone gap.

Full lifecycle

The same model that supports design coordination can feed into GSAS sustainability analysis and CAFM at handover.

Sized to the Project

We model to the detail the project stage needs — not everything to LOD 500 by default, which keeps cost and timeline realistic.

Software we model with

Alftek models in the platforms Qatar consultants and contractors already work in, so deliverables drop straight into your existing workflow instead of needing conversion. Autodesk Revit is the primary modeling platform for architectural, structural and MEP work, supported by AutoCAD and Civil 3D for site and infrastructure, and Bentley AECOsim, ArchiCAD or Allplan where a project standard calls for them.

Coordination and model review run in Navisworks, Solibri and Revizto, with Autodesk BIM 360 used as the common data environment for shared model access and version control. Where a project needs components that do not exist in a standard library, we build custom Revit parametric families for project-specific or manufacturer-specific elements.

Modeling platforms

Autodesk Revit, AutoCAD, Civil 3D, Autodesk Infraworks, Bentley AECOsim, ArchiCAD and Allplan.

Coordination & review

Navisworks, Solibri and Revizto for model federation, clash runs and resolution reporting.

Common data environment

Autodesk BIM 360 and BIM 360 Field for shared model access, version control and site workflows.

Revit family creation

Custom parametric families and component objects built for project-specific or manufacturer-specific elements.

What you receive

Modeling is only useful if it produces something the project can act on. Depending on the stage and scope agreed at kick-off, an Alftek modeling engagement in Qatar delivers any combination of the following.

LOD 300 — detail design

Accurate 3D design models at detail design stage, coordinated and clash-free.

LOD 400 — construction

Fully coordinated, construction-ready models with shop drawing production.

LOD 500 — as-built

Post-construction record models updated to reflect as-installed conditions.

BIM Execution Plan (BEP)

A project-specific BIM strategy document defining standards, workflows, roles and deliverables.

2D shop & as-built drawings

Shop drawings for contractor coordination and approvals, and as-built drawings produced from site mark-ups and verified data.

As-built drawings in Qatar →

COBie & asset data

Equipment and asset data embedded into the model, exported as COBie for handover into an FM system.

How a modeling engagement runs

Alftek follows a structured six-step delivery process on every engagement, so a Qatar project team knows what happens when, and what has to be agreed before modeling starts.

1. Preparatory & planning

Kick-off meeting to define project objectives, deliverables and BIM requirements, setting the baseline for the engagement.

2. BIM implementation

We map the benefits achievable through BIM across the project phases, then produce and agree the BEP with your team.

3. BIM project execution

Modeling, coordination, shop drawing production and all agreed deliverables are executed against that plan.

4. Tracking & monitoring

Structured monitoring keeps the work on programme and within budget, with progress reporting to keep stakeholders aligned.

5. QA/QC

Quality assurance and control runs on completion of every discipline and system, to eliminate errors, resolve clashes and confirm model accuracy.

6. Completion & handover

Final delivery of models, drawings, COBie data and documentation once the contract administrator confirms the contracted works are complete.

Sectors we model for in Qatar

Alftek has modeled across the building and infrastructure types that make up much of Qatar's construction pipeline — from stadia and metro infrastructure to healthcare, aviation and mixed-use commercial work.

Buildings

High rise buildings, hospitality and hotels, healthcare and medical, education, and mixed-use commercial developments.

Infrastructure

Metros and railways, aviation and airports, roads and infrastructure, and dry and wet utilities.

Specialist

Sports facilities and stadia, government and defence, and theme parks.

Modeling capacity

Alftek operates a fleet of more than 50 BIM workstations across its offices in Qatar and India, built for intensive modeling, rendering and point cloud workloads.

Looking for the full picture of what Alftek delivers in Qatar? See our BIM services in Qatar overview.

Frequently asked questions

What LOD does Alftek model to for Qatar projects?

We model from LOD 100 through LOD 500 depending on project stage — early massing and coordination at lower LOD, fabrication level detail and models that match what was actually built at LOD 400-500.

Which disciplines does Alftek's BIM modeling cover?

Architectural, structural and MEP modeling, coordinated together rather than produced as separate siloed models.

Is Alftek's BIM modeling ISO 19650 compliant?

Yes. We follow ISO 19650 information management workflows so modeling output stays consistent and auditable across the project.

Can Alftek model an existing building, not just new construction?

Yes, through scan to BIM — point cloud capture converted into a model of the existing structure for renovation, retrofit or facility management.

Does Alftek work from an existing design or start modeling from scratch?

Both. We can develop models from architectural drawings and specifications, or take over and continue an existing model your team has started.

Do you model in Revit?

Yes. Autodesk Revit is our primary modeling platform for architectural, structural and MEP work in Qatar. We also work in AutoCAD and Civil 3D for site and infrastructure, and in Bentley AECOsim, ArchiCAD or Allplan where a project standard requires it.

Can you create custom Revit families?

Yes. We build custom Revit parametric families and component objects for project-specific or manufacturer-specific elements that are not in a standard library.

What do you need from us before modeling starts?

A kick-off meeting to agree project objectives, deliverables and BIM requirements. From that we produce a BIM Execution Plan (BEP) defining standards, workflows, roles and deliverables, which is agreed with your team before execution begins.

Can the model be handed over for facility management?

Yes. Equipment and asset data can be embedded into the model and exported as COBie for handover into an FM system, alongside the final models, drawings and documentation.

Start your BIM modeling project in Qatar

Talk to our BIM modeling team, based in Doha, about your next project and get a scoped quote.

Request a Free Quote