Alftek builds reinforced concrete, steel and composite structural models in Revit for projects across Qatar, coordinates them against the architectural and MEP models, and produces the shop drawings, quantities and as-built records the project needs from them.
Get a Free Structural BIM QuoteThe structure is the first thing built and the hardest thing to change. Every opening, every service route and every ceiling height on a project is set by where the columns, beams, slabs and walls actually are. When the structural model is late, incomplete or out of step with the engineer's drawings, the architectural and MEP teams coordinate against the wrong geometry and the errors surface on site, in concrete.
Alftek's structural BIM service exists to prevent that. We model the structure to the level of development each stage needs, keep it consistent with the structural engineer's design, and federate it with the other disciplines so clashes are resolved on screen. Alftek has been headquartered at Alfardan Centre on Grand Hamad Street in Doha since 2018, and structural modeling is part of the same lifecycle BIM service we deliver from design through construction and handover.
Each service can run on its own or as part of a full-discipline BIM engagement under a project BIM execution plan.
Reinforced concrete, steel and composite structural models in Revit, built for coordination and quantity extraction rather than drawing production alone.
Explore BIM Modeling in Qatar →Accurate structural models at detail design stage, coordinated against architecture and MEP and checked clash-free before tender.
Fully coordinated, construction-ready structural models with shop drawing production for contractor coordination and approvals.
Model federation, clash detection runs between structure, architecture and MEP, and resolution reporting in Navisworks, Solibri or Revizto.
Explore Clash Detection in Qatar →Quantity take-off and BOQ generation from the structural model for concrete and steel quantities, kept current as the design changes.
Explore 4D & 5D BIM →LOD 500 structural record models and 2D as-built drawings updated from site mark-ups and verified data at handover.
Explore As-Built Drawings →Laser scanning of existing buildings and structures with a FARO Focus scanner, converted into Revit models for renovation, retrofit and extensions.
Explore Scan to BIM →Custom parametric Revit families for project-specific or manufacturer-specific structural components, so the model stays consistent and schedulable.
Level of development is agreed in the BIM execution plan before modeling starts, so that nobody pays for fabrication-level detail at concept stage, and nobody receives a concept model when the contractor needs to build from it.
| Level | What is modeled | Used for |
|---|---|---|
| LOD 300 · Detail design | Foundations, columns, beams, slabs, walls, cores and steel framing at their designed sizes, levels and locations, with material and grade data | Design coordination, clash detection against architecture and MEP, tender quantities |
| LOD 400 · Construction | The coordinated structure developed to construction-ready detail, with openings, penetrations and connections resolved with the other disciplines | Shop drawing production, contractor coordination and approvals, construction quantities |
| LOD 500 · As-built | The construction model updated from site mark-ups and verified data to reflect as-installed conditions | Handover record, facility management, future alterations and extensions |
Alftek follows the same structured six-step delivery process on every engagement, so a Qatar project team knows what happens when, and what has to be agreed before modeling starts.
Scope, level of development, drawing standards, naming, file formats and the coordination schedule are set out in the BIM execution plan, aligned to ISO 19650 where the client or consultant requires it. For structure that includes which elements are modeled, how levels and grids are shared with the other disciplines, and who owns openings and penetrations.
The structural engineer's drawings, schedules, specifications or analysis model are logged against a register. Inconsistencies between plans, sections and schedules are raised as queries before they are modeled.
Foundations, substructure and superstructure are modeled in Revit on the shared project grid and levels, with materials, grades and element data populated so the model schedules and quantifies correctly from the start.
The structural model is federated with the other disciplines and clash detection runs in Navisworks, Solibri or Revizto. Structural-to-architectural and structural-to-MEP clashes, such as beams through ceiling zones or services with no route through a core wall, are reported, assigned and tracked to closure.
Progress is reported against the programme with dashboards and regular reporting, and a QA/QC check runs after every discipline and system before anything is issued. Shop drawings and quantities are produced from the checked model, not drawn separately.
At the end of construction the structural model is updated to LOD 500 from site mark-ups and verified data, and issued with the as-built drawings in the formats the client's handover requirements call for, typically RVT, IFC, DWG and PDF.
A structural model produced in isolation is a drawing-production tool. A structural model coordinated with the rest of the project is a construction-risk tool. The difference shows up in the clash report.
This is why Alftek delivers structural modeling as part of full-discipline BIM rather than as a standalone drafting service: the value is in the coordination, and coordination needs all three disciplines in one federated model.
Alftek models in the platforms Qatar consultants and contractors already work in, so deliverables drop straight into the project's existing workflow.
The primary modeling platform for architectural, structural and MEP work, including structural framing, foundations and custom structural families.
Model federation, clash detection runs and issue tracking between structure, architecture and MEP.
2D structural drawing production and site, road and infrastructure modeling alongside the building structure.
Common data environment for sharing structural models, drawings and coordination issues with the wider project team.
Alftek has modeled across the building and infrastructure types that make up much of Qatar's construction pipeline, from stadia and metro infrastructure to healthcare, aviation, high-rise and government work.
High-rise residential and hospitality, healthcare and medical, education, and mixed-use commercial developments.
Metro and railway, aviation and airports, roads and infrastructure, and dry and wet utilities.
Sports facilities and stadia, government and defence, and theme parks.
More than 50 BIM workstations across Alftek's offices in Qatar and India, built for intensive modeling, coordination and point cloud workloads.
See our projects →The same Doha-based team that models the structure coordinates it, produces the drawings and quantities from it, and updates it to as-built at the end, so nothing is lost between stages.
Structure, architecture and MEP from one team, coordinated in one federated model.
Explore BIM Services in Qatar →Structured information management, so every structural change is traceable to the design information behind it.
Explore ISO 19650 →Clash detection and resolution reporting are part of the modeling service, not an extra.
Explore Clash Detection →LOD 300 design models through LOD 400 construction models to LOD 500 as-built records.
Explore As-Built Drawings →Structural BIM is a 3D model of a building's load-bearing structure, such as foundations, columns, beams, slabs, walls and steel framing, carrying the data the project needs: member sizes, materials, levels and quantities. It is coordinated with the architectural and MEP models so that conflicts are found on screen rather than on site.
Yes. Alftek is headquartered in Doha and builds reinforced concrete, steel and composite structural models in Revit for projects across Qatar, coordinates them against architecture and MEP, and produces shop drawings, quantities and as-built record models from them.
The structural BIM service on this page models and coordinates the structure designed by the project's structural engineer, who remains responsible for the design. Alftek also offers design consultancy across architecture, structure and MEP as a separate service.
Reinforced concrete, structural steel and composite construction, from substructure and foundations up through the superstructure frame, slabs, cores and roof structure, for buildings as well as metro, rail, road and utility infrastructure.
LOD 300 for coordinated detail design models, LOD 400 for construction-ready models with shop drawing production, and LOD 500 for post-construction record models updated to reflect as-installed conditions. The level is agreed in the BIM execution plan at the start.
Yes. Many Qatar projects still issue structural design as 2D drawings. Alftek converts the drawings and schedules into a coordinated Revit structural model, and raises any inconsistencies between plans, sections and schedules back to the engineer in a query register.
Yes, through scan to BIM. The existing structure is laser scanned with a FARO Focus scanner and the point cloud is converted into a Revit model, which is the usual route for renovation, retrofit and extension work where the original structural drawings are missing or unreliable.
Alftek is headquartered at Alfardan Centre, 2nd Floor, Grand Hamad Street, Doha, Qatar, and delivers BIM services nationwide including Doha, Lusail, Al Khor and Al Wakrah.
Talk to Alftek's Doha-based BIM team about structural modeling and coordination for your Qatar project. Get a free consultation and a tailored scope and quote.
Request a Free Quote